Specifications

Installation precautions

To remove the clip:

1. Position the display with its rear side facing you.

2. Pull the red clip out of the fixation holes in the foot.

3. Keep the clip in case the display needs to be shipped later.

Adjust the panel orientation

You can change the orientation of the panel at any time, but it is more

convenient to select landscape or portrait orientation before

connecting the cables.

To change the panel orientation:

1. Stand at the front side of the panel and take the panel at both

sides.

2. Very important: Tilt the panel before changing the orientation.

Should you change the panel orientation without tilting it first,

you might irreversibly damage the tilt & swivel mechanism.

Figure 15: Portrait orientation Figure 16: Landscape orientation

BAR CO