Specifications

Display Controller Installation

9. Screw in or fasten the display controller securely. Replace and

secure the computer cover.

10. Connect your BARCO NIO Displays to the display controller(s) for

your BARCO NIO Display System using the cables supplied. Make

sure all cables are securely connected before turning on your

system. Figures 6 - 13 show the types of connections are

available:

Connecting your Barco displays

For a detailed description of the display installation and signal

connection, please refer to the “Display installation” section of this

manual.

Figure 9:

IO-Panel for the Barco MXRT 1150 and Barco MXRT 2150

S-Video Connection

This option is not supported by Barco.

DMS-59 connector provides DVI-I / Head 1 & Head 2

output connections through included Y adaptor cable.