Specifications

Display parts, controls and connectors

When the display is connected to the PC USB bus, you can

connect USB devices, such as keyboard, mouse, digital camera,

to this connector.

8. DC power input

Connect the external power supply, delivered with the display,

to this connector.

9. Tilt & swivel foot clip

The display is shipped with this clip in the foot to protect the tilt

& swivel mechanism during transport. After unpacking, you

should remove this clip.

Do not throw the clip away! Should the display have to be

packed and shipped later, the clip must be applied to the foot

again.

Rear view of MDNC 3120, MDNC-3121, MDNG-

2121 and MDNG-6121

Figure 3: : Rear side

1. Connector compartment cover

To get access to the connectors, remove the cover by pulling

down the 2 clips at the top of the cover.

4 5 7