Specifications

Driver and Software Installation
65
• Windows Server 2003 x64 Edition, and
• Windows Vista 32 & 64 Bit Edition.
You will need to install the B
ARCO CORONIS Display system drivers and
software in the following cases:
• After you have installed the display controller(s) for your
B
ARCO CORONIS Display System in your system for the first time.
• After you have reinstalled or upgraded your operating system.
• After you have moved the display controller(s) to a different
PCI/PCIe slot.
1. Start your system. When the Found New Hardware Wizard
comes up, click Cancel. When the System Settings Change
window asks you to restart your computer, click No or Restart
Later.
2. Run the Barco Product Installation Wizard.
The Barco Product Installation Wizard should start automatically
if you insert the B
ARCO CORONIS Display System Installation
CD-ROM into your CD/DVD drive after the operating system has
started. If your CD/DVD drive’s auto-run is not enabled or the
Barco Product Installation Wizard does not start automatically,
you can run the Barco Product Installation Wizard manually by
following these steps:
a) Click the Start button in the task bar.
b) Click Run.
c) Click Browse and browse to the root directory of the
B
ARCO CORONIS Display System Installation CD-ROM and
click on the file, Setup.exe, and click Open.
d) Click OK.
or
a) Browse to the root directory of the B
ARCO CORONIS Display
System Installation CD-ROM and double click on the file,
Setup.exe.
3. Click Next twice.