Specifications

Driver and Software Installation

This chapter will guide you through the installation of the drivers,

software and documentation associated with your B

ARCO CORONIS

Display System or B

ARCO CORONIS Display(s).

The process for the B

ARCO MXRT family of controllers and BARCOMED

family of controllers is handled separately.

If you install Barco displays without Barco display controllers, no

drivers will be installed. Only the online user manual will be installed

on your system.

Driver and software installation prerequisites

Note: To install or remove the drivers, software, or

documentation you must be logged on as a user with

administrator privileges.

Your operating system must be installed and running before you can

install the driver, software and documentation for the display

controller(s) for your B

ARCO CORONIS Display System.

Before you begin make sure that all of your B

ARCO CORONIS Display(s)

are connected to the appropriate display controller(s) in your system.

Note: This installation procedure is based on operating

Windows in “Classic” view style. If “Home” or “Default” view

style is selected in Windows, sections of this procedure may be

different than what is listed.

Installing the BARCO MXRT drivers and software

Note: The installation dialog will display in English if your

operating system’s language is not supported.

This process applies to the following versions of Windows:

• Windows XP Professional,