Specifications

Single-head installation

To attach the panel unit to the display stand:

1. Take the display stand from the packaging and put it on a solid

flat surface.

2. Take the panel unit from the packaging and hold it in portrait

position. The I-Guard should be positioned bottom right.

3. Hook the top gaps in the rear of the panel over the top anchors

of the stand attachment plate (1). see figure 16.

4. Push the bottom of the panel firmly towards the stand so that

the bottom anchors clip in the bottom gaps (2).

5. Check that the panel is firmly attached to the stand.

Figure 16: Attaching the panel to the display stand