Specifications

Display Controller Installation
28
7. Align the display controller(s) for your BARCO CORONIS Display
System with the slot(s) and press it(them) in firmly until the
card(s) is(are) fully seated.
Note: The next step applies only to the MXRT 5100, MXRT
7100, and MXRT 7200.
8. Connect the power cable(s) to the 6-pin power connection(s) on
the graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
Figure 4: Power connection for the MXRT 5100 and 7100 controllers
Figure 5: Power connection for the MXRT 7200 controller
6-pin graphics controller
power cable
6-pin graphic controller
power cables - connect
2 cables as shown