User manual

Cleaning
67
Precautions
• Take care not to damage or scratch the glass or LCD panel.
• Do not apply pressure on the glass or LCD panel.
• Do not apply or spray liquid directly to the glass, panel or
cabinet as excess liquid may cause damage to internal
electronics. Instead, apply the liquid to the cleaning cloth.
•DO NOT USE:
- Lye or cleaning solutions containing lye*
- Acid
- Detergents with fluoride
- Detergents with ammonia
- Detergents with abrasives
- Steel wool
- Sponge with abrasives
- Cloth with thread made of steel
- Other coarse tools
*(Lye is a strong caustic alkaline solution of potassium salts.)
Panel
Important:
We recommend to let this cleaning procedure be done in a Barco service
center. If not, you must perform the cleaning in a clean and dust-free
environment.
1. If there are dust particles on the LCD panel, blow them away by
using a dust remover. E.g., DUST OFF 67 (KONTAKT Chemie).
A dust remover is composed of a blend of compressed liquid gases
functioning as propellant. They provide a jet of dry inert gas that
acts like compressed air for a quick and safe removal of dust