User guide

5. Configuring Windows

5. CONFIGURING WINDOWS

5.1 Co nﬁguring SingleView

How to conﬁgure SingleView

1. From the Start Menu, select All Programs.

2. Under the Barco Programs folder, select the desired conﬁguration:

Image 5-1

SingleView Start Menu options

When your Fusion display is conﬁgured in SingleView mode, it i s possible that the left

and right sides of the image are not in the correct order. In this case, click on the Swap

SingleView Le ft & Right option, and it will adjust the heads on the desktop.

5.2 Conﬁguring Barco Displays with the Windows Display

Control P an el

How to display the Windows desktop

1. Right click on the desktop, and select Screen resolution.

2. From the Windows Display Control Panel, highlight the Barco display whose mode you wish to set, and

select Advanced settings.

3. In the Adapter tab of the Advanced settings dialog box, click on the List All Modes button.

4. Select the resolution and refresh rate that your Barco Display Controller supports from the dialog box

and click OK.

5. Click OK on the bottom of the Adapter control panel.

6. Click Yes in the “Do you want to keep these display settings?” dialog box. Your Barco Display Controller

should now synchronize and display the Windows desktop.

5.3 Conﬁguring software rotatio n

How to change your screen orientation

Software rotation is only necessary for displays that do not support hardware rotation, such as MDRC

displays and some third party displa

ys.

1. Right click on the Desktop, and select Screen Resolution in the context menu.

K5905271 DISPLAY CONTROLLER 11/09/2014