User manual

89
drop-down menu. Head A is reserved for the flat panel display and
Head B is reserved for the projector.
2 Barco flat panel displays are added immediately. For all other display
types, the Display Connection Setup dialog appears.
a) Select the Serial port tab if you want to add a Barco projector
connected to the serial (Remote) bus.
- Check the communication port to which the display is connected.
- Click on Identify to see which display is connected to which head.
For a few seconds, you will see the letter of the heads on the
displays. They automatically disappear after a few seconds. In
case of a projector, the projector’s shutter closes a few times.
- Click on Show display to see which display corresponds to the
Remote Address chosen from the drop-down list.
The image of the selected display will blink for a few times.
b) Select the No Link tab if you want to add a non-Barco display
.