User manual

77
2 To get more information about a specific task, click on the name of the
task and then click on the More Info button.
3 To add a task, click on the name of the task you wish to add and then
click on the Add button.
4 When finished, click on the Close button.
Notes:
There is no way to remove the tasks from the schedule. If you do not
want a task to be executed, you have to disable it (see below).
To see which plug-ins are installed, you can open the Help menu of
MediCal Pro.
Enabling or disabling tasks
To enable or disable a task:
1 In the Q/A setup window, right-click on the name of the task you wish
to enable or disable. A drop-down menu appears.
2 Select Status > Disabled to disable the task. As a result, the task will
not be executed until it is manually enabled again.
Select Status > Enabled to enable the task to be executed. The task
will be executed according to the entered schedule. This is indicated
by the check mark in the Due column.