User manual

First installation 51
The possible display alignment families are:
Horizontal geometry settings
Vertical geometry settings
East-West geometry settings
White uniformity settings (on color displays only)
The Alignment dialog contains the following elements:
• The icons at the top of the dialog indicate the different alignment
families (e.g., horizontal geometry, vertical geometry etc.).
• The second row of icons represents the different alignments that
belong to the selected alignment family.
• The names of alignment families and alignments appear as screen tips
when you move the mouse pointer over their icons.
• The slider under the icons allows you to perform the alignment. Drag
the slider or click inside the slider bar. Click on the Reset button to
undo the alignment.
• The text box under the slider indicates how to perform the alignment
properly. Follow the instructions in this text box carefully.
•The Next>> button selects the following alignment. If you are not
experienced in aligning the display, it is best to follow the sequence of
alignments by using the Next>> button until you have performed all
the alignments.
•The <<Back button selects the previous alignment.
• By clicking on the OK button, you exit the alignments. All changes are
saved.
• By clicking on the Cancel button, you exit the alignments without
saving any changes.