User manual

First installation 47
4 Unplug the Remote Out connection of the first display. When ready,
click on Next.
5 Plug in the remote cable into the Remote Out connector of the first
display again.
6 Unplug the Remote Out connection of the second last Barco display.
E.g., if 4 Barco displays are connected, you need to unplug the Remote
Out connection of the 3rd one.
When ready, click on Next.
7 You have to repeat the previous step on the other Barco displays, in
descending order towards the computer.
Read and follow the instructions of the Wizard carefully.
8 After having disconnected each display one by one, reconnect all data
cables.
Make sure they are connected properly!
Click on Next.