User manual

First installation 32
8Click on Finish to go to the MediCal Pro main window.
2.5 Setting up the configuration
Introduction
The medical viewing station consists of a computer, a number of imaging
boards (containing one or more heads), an optical sensor and one or
more displays. They are all connected physically, by means of cables and
connectors.
An example of a medical viewing station consisting of one PC with four imaging board heads and four Barco
flat panels connected. Those panels have an internal optical sensor.
The configuration is the logical representation of the viewing station’s
components in MediCal Pro.
A complete configuration contains the following information:
- The number of imaging board heads inside the computer
- The imaging board properties
- The number of displays connected to the heads
- The properties of connected displays
- Whether or not a sensor is connected or built-in
- The properties of the sensor, if connected