User manual

First installation 25
- On Barco displays:
You can connect a serial sensor to the Sensor connector (front or
rear).
A USB sensor can be connected to one of the downstream USB ports
on the display. In that case however, the display must be connected
to the PC USB bus as well.
For Dicom Theater
, the sensor is connected via USB.
- Non-Barco displays
don’t have a direct connection for the sensor. So if
the viewing station contains non-Barco displays, connect the sensor to
the viewing station’s computer. Connect it to a free COM or USB port.
2.3 MediCal Pro installation
Minimum System requirements
• Operating system: Windows NT4/Windows 2000/Windows XP
• Memory: 128 MByte
• Free disk space: 50 MByte
• Internet Explorer 4.0
Before installing MediCal Pro
1 You must have Administrator privileges to install the software.
2 If there are older versions of MediCal Pro or MediCal Control installed
on the PC, remove them. Please refer to the § “Uninstalling MediCal
Pro”, further in this chapter.
Installing MediCal Pro
To install MediCal Pro, enter Windows and follow these steps:
1 Exit all open programs.
2 Insert the CD-ROM containing the MediCal Pro installer program in the
CD-ROM drive.
3 The CD-ROM starts automatically. After a few seconds, the MediCal Pro
welcome window appears.
4Click on Install. The Setup application starts.
5 Click on the Next> button.
6 Read the License agreement on the screen very carefully. Scroll down
to read the complete text.
7Click on Yes if you agree with the License agreement and wish to
continue with the installation.
8 In the Customer information window, fill in the user name, company
name, and serial number of MediCal Pro. You can find the serial
number on the CD-ROM jewel case. Click on Next>.
9 A window appears, indicating the directory where MediCal Pro is
going to be installed.