User guide

Advanced
21
To adjust the phase:
Note: Before adjusting the phase, adjust the frequency (see
below).
1. Display a dot on-dot off test pattern.
Tip: You can find a suitable test pattern on the product CD-ROM.
2. Adjust the phase so that the test pattern appears as bright as
possible and is completely free of noise and moving lines.
To adjust the frequency:
1. Display a dot on-dot off test pattern.
Tip: You can find a suitable test pattern on the product CD-ROM.
2. In the Adjustments menu, Scaling submenu, select Fit width.
3. As you adjust the frequency you will notice dark vertical bands
appearing in the image. Adjust the frequency so that the test
pattern is completely free from vertical bands and interferences.
It may be necessary to repeat Phase and Frequency adjustments to
obtain the best result.
Restore factory
settings
Touch Enter , which opens a submenu.
Touch or to select Yes and touch to
restore the factory settings.
As a consequence all user settings, including the
user presets and user profiles, will be erased and
the display will restart.
Item Description