User guide

Adjustments
11
Autosetup submenu
Use this menu to perform an automatic adjustment. This menu is
available only when an analog video input is selected.
There are 4 different ways to perform an autosetup.
It is very important to display a proper test pattern while performing
these functions. The requirements for the test pattern are described in
the table below.
Noise reduction Adjust this in case the selected video source
exhibits unwanted noise. Note that this adjust-
ment reduces noise but also reduces image sharp-
ness.
Sharpness Adjusts the image sharpness.
Autosetup Takes you to the autosetup submenu (see below)
Restore Current
Preset
Takes you to the restore current preset submenu
(see below).
Scaling Takes you to the scaling submenu (see below).
Adjust scaling This function is visible only when Adjustable scal-
ing is selected.
Use this function to adjust the scaling manually.
The picture size will be controlled proportionally.
Aspect ratio Takes you to the aspect ratio submenu (see
below).
Adjust Aspect
Ratio (ASR)
This function is visible only when Adjustable
aspect ratio is selected.
Use this function to adjust the aspect ratio manu-
ally. The picture width will be controlled whereas
the picture height remains unchanged. To adjust
picture height as well, you must adjust Scaling.
Item Description