MDRC-1119 MDRC-2120 User manual
Copyright notice This document is copyrighted. All rights are reserved. Nor this document, nor any part of it, may be reproduced or copied in any form or by any means - graphical, electronic, or mechanical including photocopying, taping or information storage and retrieval systems without written permission of Barco © 2014 Barco N.V. All rights reserved.
Table of Contents Table of Contents ....................................................................................... 3 Preface........................................................................................................ 5 Important notice.................................................................................... 5 Environmental information ................................................................... 6 Recommendations for using your display system............................
Technical specifications MDRC-2120 .................................................. 57 Compatibility Modes MDRC-2120 ....................................................... 59 Regulatory Compliance .......................................................................
Preface Important notice Notice Although every attempt has been made to achieve technical accuracy in this document, we assume no responsibility for errors that may be found. Our goal is to provide you with the most accurate and usable documentation possible; if you discover errors, please let us know. Barco software products are the property of Barco. They are distributed under copyright by Barco N.V., for use only under the specific terms of a software license agreement between Barco N.V.
Environmental information Disposal Information The lamps inside the display contain mercury. Do not throw the display in the trash. Dispose of it as required by local ordinances or regulations. This equipment has required the extraction and use of natural resources for its production. It may contain hazardous substances for health and environment.
Safety Instructions General Recommendations Read the safety and operating instructions before operating the display. Retain safety and operating instructions for future reference. Adhere to all warnings on the display and in the operating instructions manual. Follow all instructions for operation and use.
Degree of Safety in the Presence of Flammable Anesthetic Mixture with Air or with Oxygen or Nitrous Oxide: Not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide. Mode of Operation: Continuous. Intended use This display is an AMLCD display designed for viewing medical X-ray images. This unit should not be used near patients and should be kept outside of 1.83 m perimeter and 2.29 m vertical.
Do not overload wall outlets and extension cords as this may result in fire or electric shock. Mains lead protection (U.S.: Power cord): Power cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles. Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standard of your particular country.
Water and moisture Never expose the display to rain or moisture. Never use the display near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement. Ventilation Do not cover or block the ventilation openings in the cover of the set. When installing the display in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard.
2. Use a screen saver to avoid image retention Prolonged operation of an LCD with the same content on the same screen area may result in a form of image retention. You can avoid or significantly reduce the occurrence of this phenomenon by using a screen saver. You can activate a screen saver in the “Display properties” window of your workstation. Barco recommends setting screen saver activation after 5 minutes of non-usage. A good screen saver displays moving content.
5. Maximize Quality Assurance The ‘MediCal QAWeb’ system offers online service for high-grade Quality Assurance, providing maximum confidence and uptime. Learn more and sign up for the free MediCal QAWeb Essential level at www.barco.com/healthcare/qa Unpacking and handling tips The MDRC display is a precision instrument that requires proper care to maintain product operation and adherence to specification.
Preventing fire and injury Replace the power supply or cables if damaged. Use only the power source indicated in this guide or listed on the display. Do not plug the power supply into an overloaded AC outlet or extension cord. Overloaded AC outlets and cords can result in electric shock or fire. Do not drop or push objects into the display case. Internal components contain high voltage. Unplug the power cord from the wall outlet during thunderstorms.
Do not expose the display to water or excessive moisture. Do not allow water or other stains to stand on the unit. Wipe liquids off immediately to prevent damage to the display case and the screen. Shipping/storing the display Keep the display in its shipping container until installation. Return the display to its original container whenever you need to store the unit, move it to another location, or return it for repair.
Explanation of symbols DISPOSAL. Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries require the use of separate recycling collection services. CAUTION. Read the accompanying text carefully for proper operation and maintenance of the display system.
Introduction About the product Thank you for choosing Barco. The MDRC series are LCD displays with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD). These products also demonstrate the following outstanding features: MDRC-1119 / MDRC-1119 TS / MDRC-1119 HB Dual Analog and Digital signal. 19” diagonal Screen. 1280x1024 high resolution. Wide Viewing Angle Technology. 31.5 ~ 80 kHz horizontal scan. 56 ~ 75 Hz refresh rate. Auto Adjustment and Re-scaling function.
MDRC-2120 Dual Analog and Digital signal. 20.1” diagonal Screen. 1600x1200 high resolution. Wide Viewing Angle Technology. 31.5 ~ 93.75 kHz horizontal scan. 59 ~ 61 Hz refresh rate. Auto Adjustment and Re-scaling function. High quality full screen re-scaling capability. Multilingual OSD user controls. VESA DPM power saving.
Package Overview Power Adapter USA Power Cord VGA Signal Cable 18 EUR Power Cord China Power Cord DVI-D Cable User’s Manual
Installation Product Overview Front View 19
Back View MDRC-1119 / MDRC-1119 TS / MDRC-1119 HB USB Ports DC Power-In VGA Input DVI-D Input MDRC-2120 DC Power-In USB Ports 20 VGA Input DVI-D Input
Tilt Grasp the LCD Display with both hands and adjust the tilt as desired. Kensington Security Slot The Monitor can be secured to your desk or any other fixed object with Kensington lock security products. Kensington lock is not included.
Start Your Installation Connecting the Display Use only the power adapter which are the forming part of each medical device, the power cord, and the video cable shipped with this display. CAUTION: For MDRC-1119 / MDRC-1119 TS: The universal external 12V DC/ 5.0A power adapter (100-240V~, 1.5A, 50-60Hz for power adapter rating) is the BridgePower (BPM060S12F09). For MDRC-2120: The universal external 24V DC/ 2.7A power adapter (100-240V~, 1.
than or equal to the native resolution, and make sure the timing of the display mode is compatible with the LCD screen. We have listed the “Compatibility Modes” of this LCD screen in appendices for your reference.
Adjusting the screen position Vertical Height Portrait/Landscape Left to Right Pan Front to Back Tilt Remove Monitor Stand may forcefully extend and cause injury Lift Monitor to "Full UP" position in advance Picking up the base or removing the monitor 24
User Controls Jog Dial Controls 25
No./ Icon Control Function - Power Switch - Menu 1. Press the jog dial button for 1 sec to power off to the LCD Display. 2. Swivel jog dial button for OSD menu Jog Dial button LED Power LED 1. Green indicates the display is turned on. 2. Orange indicates the display is in stand-by mode. How to Use the OSD Menus 26 1. Swivel the Jog dial button to pop up the ”on-screen menu” and to scroll among the six Main Menus. 2. Choose the adjustment items by pressing the jog dial button. 3.
On-Screen Display Menus Main Menu Function Input Selection Description Go to the ‘Input Selection Menu’ while the jog-dial button is pressed. Adjustments Go to the ‘Adjustment Menu’ while the jog-dial button is pressed.
Color Go to the ‘Color Menu’ while the jog-dial button is pressed. Geometry* Go to the ‘Geometry Menu’ while the jog-dial button is pressed. Settings Go to the ‘Settings Menu’ while the jog-dial button is pressed. Information Go to the ‘Information Menu’ while the jog-dial button is pressed. Exit 28 Close this menu.
Input selection Menu Function DVI Description Select the DVI input while the jog-dial button is pressed. VGA Select the VGA input while the jog-dial button is pressed. Back Go back to the ‘Main Menu’. Exit Close this menu.
Adjustments Menu Function Brightness Contrast** Description To adjust the backlight luminance.. To adjust the image contrast (only applicable if VGA is selected). Sharpness** Manual adjustment of the image sharpness (only applicable if VGA is selected) Gamma Go to the ‘Gamma Menu’ while the jog-dial button pressed. Exit 30 Close this menu.
Adjustments -> Gamma menu Function Description Native Select the panel original gamma. Gamma 1.8 Select the Dynamic Gamma 1.8. Gamma 2.2 Select the Dynamic Gamma 2.2. Dicom Select the Dicom. User Select the user defined gamma which built by QAWeb Agent tool. Back Go back to the ‘Adjustments Menu’ Exit Close this menu.
Color Menu Function Description Native Select the panel original color temperature. Clearbase Set the image color temperature to Clearbase Bluebase Set the image color temperature to Bluebase User Go to the ‘User Menu’ while the jog-dial button pressed. Back 32 Go back to the ‘Adjustments Menu’.
Exit Close this menu. Color Menu -> User Menu Function Description Red Turn red gain value manually. Green Turn green gain value manually. Blue Turn blue gain value manually. Back Go back to the ‘Color Menu’. Exit Close the menu.
Geometry Menu** Function Auto set Description Adjust the image parameters to obtain a correctly aligned image automatically while the jog-dial button pressed. clock Adjust the internal clock frequency manually. Increase this value to make the image wider, decrease this value to make the image smaller. Phase Adjust the internal clock phase manually. If this setting is not correct, the vertical bands with alternate intensity will be visible.
Horizontal position Adjust the image horizontal position manually. Vertical position Adjust the image vertical position manually. Exit Close this menu.
Setting Menu Function OSD Setting Description Go to the ‘OSD Settings menu’ while the jog-dial button is pressed. Factory Reset Go to the ‘Factory Reset Menu’ while the jog-dial button is pressed. Language Go to the ‘Language Menu’ while the jog-dial button is pressed.
Power Save Go to the ‘Power Save Menu’ while the jog-dial button is pressed. LED Go to the ‘LED Menu’ while the jog-dial button is pressed. Back Go back to the ‘Main Menu’. Exit Close this menu.
Settings Menu -> OSD Settings Menu Function Description OSD Timeout Set the OSD timeout value. OSD Horizontal Set the OSD horizontal alignment OSD Vertical Set the OSD vertical alignment OSD Direction Go to the ‘OSD Direction Menu’ while the jog-dial button pressed. 38 Back Go back to the ‘Settings Menu’. Exit Close the menu.
Settings Menu -> OSD Settings Menu -> OSD Direction Function Description Landscape Select OSD Landscape. Portrait Select OSD Portrait. Back Go back to the ‘OSD Settings Menu’. Exit Close the menu.
Settings Menu -> Factory Reset Menu Function 40 Description Yes Execute the ‘Factory Reset’. No Abort the ‘Factory Reset’. Back Go back to the ‘Settings Menu’. Exit Close the menu.
Settings Menu -> Factory Reset Menu Function Description English Execute the ‘Factory Reset’. Français Select 'Français' as the OSD words while the jog-dial button pressed. Deutsch Select 'Deutsch' as the OSD words while the jog-dial button pressed. Español Select 'Español' as the OSD words while thejog-dial button pressed. Italiano Select 'Italiano' as the OSD words while the jog-dial button pressed. Nederlands Select 'Nederlands' as the OSD words while thejog-dial button pressed.
Settings Menu -> Power Save Menu Function 42 Description On Enable the ‘Power Save’ function. Off Disable the ‘Power Save’ function. Back Go back to the ‘Settings Menu’. Exit Close the menu.
Settings Menu -> LED Menu Function Description On Enable the LED. Off Disable the LED. Back Go back to the ‘Settings Menu’. Exit Close the menu.
Information Menu Function Description FW version Firmware version System hours System run time Backlight run time Backlight run time Back Go back to the ‘Main Menu’. Exit Close the menu. Notes 1：Symbol (*) means only active while VGA is selected. Otherwise, it will be un-selectable with gray color, and the subordinate items are blocked. Note 2: Symbol (**) means only active while VGA is selected. Otherwise, it will be not selectable with gray color.
Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following troubleshooting. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. Check that all the I/O and power connectors are correctly and well connected as described in the “Installation” section. Make sure the pins of the connectors are not crooked or broken. Problem: Partial image or incorrectly displayed image.
Problem: Image is unstable and flickering Use “Phase” to make an adjustment. Problem: Image is scrolling Check and make sure the VGA signal cable (or adapter) is well connected. Check and reconfigure the display mode of the vertical refresh rate of your graphics card to make it compatible with the LCD Display. Problem: Vague image (characters and graphics) Use “Clock” to make an adjustment. If this problem still exists, use “Phase” to make an adjustment.
Product Dimensions MDRC-1119/MDRC-1119 TS/MDRC-1119 HB 47
Technical specifications MDRC-1119 LCD Panel MDRC-1119 Technology TFT Color LCD (VA) Native resolution 1280 x1024 Active screen diagonal 19" (483 mm) Active screen area 376 x 301 mm Pixel Pitch 0.294 x 0.
OSD languages English, French, German, Spanish, Italian, Dutch, Simplified Chinese, Traditional Chinese, Korean. Options Protective Cover Yes Touch Screen No Landscape/Portrait Yes Certifications EMC EN 60601-1-2; FCC-B; ICES-001, VCCI, KETI, CCC, BSMI Safety CE EN60601-1; UL ANSI/AAMI ES60601-1, c-UL, CAN/CSA-C22.2 NO. 60601-1, CCC, KETI, PSE, BSMI Mechanical characteristics Display dimensions (W x H x D) 418 x 346 x 70 mm Landscape, w/o pedestal Display weight With Stand : 8.
Environmental Operating T (min-max) 0° to 35°C (32° to 95°F) Humidity 8% - 80% (no condensation) Storage & Transport Humidity 5% - 90% (no condensation) Technical specifications MDRC-1119 TS LCD Panel MDRC-1119 TS Technology TFT Color LCD (VA) Native resolution 1280 x1024 Active screen diagonal 19" (483 mm) Active screen area 376 x 301 mm Pixel Pitch 0.294 x 0.
Connectivity and control Video Input DVI VGA (DB15) USB OSD languages (1 upstream, 2 downstream) English, French, German, Spanish, Italian, Dutch, Simplified Chinese, Traditional Chinese, Korean. Options Protective Cover No Touch Screen Yes Landscape/Portrait Yes Certifications EMC EN 60601-1-2; FCC-B; ICES-001, VCCI, KETI, CCC, BSMI Safety CE EN60601-1; UL ANSI/AAMI ES60601-1, c-UL CAN/CSA-C22.2 NO.
Output: 12Vdc/5A For only use power supply BridgePower: BPM060S12F09 Standby Power <1W Power consumption 50 Watts Environmental Operating T (min-max) 0° to 35°C (32° to 95°F) Humidity 8% - 80% (no condensation) Storage & Transport Humidity 5% - 90% (no condensation) Technical specifications MDRC-1119 HB LCD Panel MDRC-1119 Technology TFT Color LCD (VA) Native resolution 1280 x1024 Active screen diagonal 19" (483 mm) Active screen area 376 x 301 mm Pixel Pitch 0.294 x 0.
Display LUT Response time 10 bit (G-G) 8 ms Display Functions Gamma, Dicom Colors 16.7 million Connectivity and control Video Input DVI VGA (DB15) USB OSD languages (1 upstream, 2 downstream) English, French, German, Spanish, Italian, Dutch, Simplified Chinese, Traditional Chinese, Korean.
WARNING: use suitable mounting apparatus to avoid risk of injury. Power requirements System rating Input: 12Vdc/7A External DC Power Supply Input: 90V-264V (50Hz-60Hz), 2.
VESA VGA VESA VGA VESA SVGA VESA SVGA VESA SVGA VESA SVGA 640x480 640x480 800x600 800x600 800x600 800x600 72 75 56 60 72 75 37.9 37.5 35.1 37.9 48.1 46.9 VESA XGA VESA XGA VESA XGA 1024x768 1024x768 1024x768 60 70 75 48.4 56.5 60.0 VESA XGA VESA XGA 1152x870 1152x864 60 75 54.36 68.1 VESA SXGA VESA SXGA 1280x1024 1280x1024 60 75 63.96 79.95 Apple Mac II Apple Mac Apple Mac 640x480 832x624 1024x768 67 75 75 35.0 49.7 60.
Product Dimensions MDRC-2120 56
Technical specifications MDRC-2120 LCD Panel MDRC-2120 Technology TFT Color LCD (IPS) Native resolution 1600 x1200 Active screen diagonal 20.1" (510.54 mm) Active screen area 432 x 331.5 mm Pixel Pitch 0.255 x 0.
OSD languages English, French, German, Spanish, Italian, Dutch, Simplified Chinese, Traditional Chinese, Korean. Options Protective Cover Yes Touch Screen No Landscape/Portrait Yes Certifications EMC EN 60601-1-2; FCC-B; ICES-001, VCCI, KETI, CCC, BSMI Safety CE EN60601-1; UL ANSI/AAMI ES60601-1, c-UL CAN/CSA-C22.2 NO.60601-1, CCC, KETI, PSE, BSMI Mechanical characteristics Display dimensions (W x H x D) 455 x 354 x 70 mm Landscape, w/o pedestal Display weight With Stand : 9.
Environmental Operating T (min-max) 0° to 35°C (32° to 95°F) Operating Humidity 8% - 80% (no condensation) Storage & Transport Humidity 5% - 90% (no condensation) Compatibility Modes MDRC-2120 Standard Resolution Vertical Refresh (Hz) Horizontal Scan (KHz) VGA 640x480 60 31.50 SVGA 800x600 60 37.68 XGA 1024x768 60 48.36 1152*870 60 54.36 SXGA 1280*1024 60 63.96 1MP2FH 1280*1024 60 62.50 1024*1280 59 77.78 UXGA 1600*1200 60 75.00 2MP2FH 1600*1200 59 72.
Regulatory Compliance Canada, European Union, United States This display has been tested and found to comply with IEC/EN 60601-1 and IEC 60601-1-2 standards, and is certified to meet medical standard ANSI/AAMI ES60601-1 and CAN/CSA C22.2 No 60601.1(C US Mark) which are related to electrical shock, fire and mechanical hazards only as shown on right UL mark on this page.
The European Medical Device Directive requires that the intended use of the device be defined. The intended use of these displays is “to display alphanumeric, graphic, and image data as inputted from any type of medical device.” These displays do not provide a measurement function in any way, and it is the device and systems manufacturer’s responsibility to verify its function in the integrated device or system.
EU Declaration of Conformity for Medical Application A Declaration of Conformity has been filed for this product.
process measurement and control equipment IEC 61000-4-4 Electrically fast transients for industrial process measurement and control equipment IEC 61000-4-5 Surge requirements IEC 61000-4-11 Voltage variations/dips/interrupts IEC 61000-4-6 Conducted immunity IEC 61000-4-8 Magnetic field immunity Conformance to the Medical Device Directive 93/42/EEC EN 60601-1 Medical Part 1 General requirements for safety Electrical Equipment. U.S.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
B4100531-05 January 2014 Barco nv President Kennedypark 35 8500 Kortrijk Belgium www.barco.
