User guide

6. Maintenance
6. MAINTENANCE
General maintenance information
The Eonis does not require any scheduled maintenance or calibration activities. We recommend to use
QA Web with the Barco default tests and frequencies to calibrate and maintain the display or return the
display to a Barco approved maintenance organization. In any case of doubts, contact the Barco Health-
care Division
6.1 Cleaning instructions
To clean the display
Clean the display using a sponge, cleaning cloth or soft tissue, lightly moistened with plai
nwater.
Do not use following products:
• Alcohol/solvents at higher concentration > 5%
• Strong alkalis lye, strong solvents
•Acid
• Detergents with fluoride
• Detergents with ammonia
• Detergents with abrasives
• Steel wool
• Sponge with abrasives
• Steel blades
• Cloth with steel thread
CAUTION: Take care not to damage or scratch the front glass or LCD. Be careful with
rings or other jewelry and do not apply excessive pressure on the front glass or LCD.
CAUTION: Do not apply o r spray liquid di rectly to the display as excess liquid may cause
damage to internal el ectronics. Instead, apply the liquid to a cleaning cloth.
K5903081 EONIS 17/06/2014 21