User`s manual

doc-3302-2 OverView mDR50-DL (May 2003) 10-3
Maintenance Area
The floor space for OverView mDR50-DL is calculated from the basic area of the structure. A
maintenance area must be provided behind each OverView mDR50-DL over the complete width.
This area must be permanently accessible. The exact regulations for such a maintenance area can
be obtained from the specifications for working premises.
finished floor
finished ceiling
>600*
c
2002
service area
>600*
d
2984
service area
a
b
568
>150
1602
875
Figure 10-2
Linear and polygonal set-up of OverView mDR50-DL
(All dimensions measured in millimeters!)
dimensions
a < 157 mm
b
< 127 mm
c < 725 mm
d
< 864 mm
*600
Note, that there may be laws concerning safety standards in your country!
The OverView mDR50-DL Display Wall can have a linear or curved arrangement. With a curved
design, standard connection angles of 5^° and 8° are available. Other angles on request!