Installation manual

8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
_________________________________________________________
__________________________________________________
_________________________
8-22
0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0,9
1
1400 1600 1800 2000 2200 2400 2600 2800 3000
dimmer position [ steps ]
normalized DIS value
Figure 8-29
intensity of emitted light depends on the position of the dimmer wheel
Only dimmer positions between (approx.) 1600 (minimum brightness) and (approx.)
2600 (maximum brightness) can be addressed.
The dimmer wheel can be enabled or disabled by means of the menu
Service | Color/Brightnes |Optical Dimmer.
If Optical Dimmer is selected, a dialog box pops up where the current status is indicated and where this status
can be changed:
Figure 8-30
Dialog Box to enable/disable the optical dimmer
The correct setting is Enabled!
Disabled should only be selected in case the dimmer is defective (stuck)!