Installation manual

8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
8-6
8.5 Access to the service menu
To access the service menu of the OSD, proceed as follows:
Start the OSD
Move the cursor to Brightness
Figure 8-8
first step to activate the Service Menu
Enter the access code via the numeric keys on the IR Remote-Control. Press Enter to complete!
The Service menu entry is shown.
Move the cursor to highlight Service. Press Enter to select. The following menu items are displayed:
Figure 8-9
Service Menu