Installation manual

8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
8-3
8.2 General
OVERVIEW MDG50-DL has a build in "PC like" toolbar menu which allows easy access to different parameters for
setting up the projector.
The toolbar menu is activated by pressing ADJ
Menu items which are not applicable are grayed out.
8.3 Menu Layout
The existence of a submenu is indicated by a white arrow
Three suspension points indicate that the menu item hides a dialog box or a text box.
A dot indicates which option is selected.
Grayed out menus or items are not available in this software version.
8.3.1 Navigating
Use the cursor keys on the RCU to navigate within a menu or a submenu.
Press Enter to select a menu item
Press Enter to open the submenu.
Press Exit to exit a submenu or menu
8.4 Activating the Menu Bar
Press the ADJ key on the RCU to display the menu bar.
Figure 8-2
menu bar
Use the cursor key on the RCU to select a menu. Press Enter to activate it.
8.4.1 Reset Runtime
After insertion of a new the lamp, its serial number has to be entered.
The command Reset runtime displays the dialog to enter the serial number.
Figure 8-3
Reset runtime