Installation manual

7. Optical Adjustment
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
7-9
7.10 Horizontal trapezoid
A horizontal distortion looks like this or similar.
Figure 7-14
Rear view horizontal trapezoid
Turn the adjustment screw H1 counterclockwise ( Figure 7-6 ) and H2 clockwise until the vertical lines gets
parallel to the border of the screen.
Figure 7-15
Rear view horizontal trapezoid
Turn the adjustment screw H1 clockwise ( Figure 7-6 ) and H2 counterclockwise until the vertical lines gets
parallel to the border of the screen.