Installation manual

6. Installation of Projection System
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
6-4
Figure 6-5
Overview illumination unit
Pos Description Pos Description
A Main Power 1 Connectors
B
Rocker switch On/Res. with LED
2
Optical interface
C Rocker switch active Lamp 3 Cooling air outlet
D LEDs (L1, L2, Fan) 4 Cover lamp top (lamp 1)
E LED lamp door 5 Cover lamp bottom (lamp 2)
F Position of guide pins
G Position of securing screws
Table 5
Due to the keyholes, the securing screws might already be pre-installed.
Loosen the securing screws (see Figure 6-2) slightly and move them about 5 mm downwards
Tighten the securing screws.