Installation manual

5. Wall fixation
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
5-1
Linear version
The length of the profile is project specific and defined by the distance between the rear
side of the display wall and the wall of the building!
The attachment of the profile on the wall of the building allows to be positioned between
30degrees and 60degrees off the straight connection thus also eliminating unevenness of
the wall.
The following pictures show a sketch of the installed wall fixation on the display wall:
Figure 5-2
wall fixation, linear version
Item no. quantities Description
7 1 Profile (length: project specific)
9 1 Screw M10x110
4 1 Fixation bracket display wall side
5 2 Washer U-6-125
1 2 Screw M6x40
8 1 Distance bushing
10 1 Nut M10
11 1 Washer U-10-125