Installation manual

3. Installation of Screen Module
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
_________________________________________________________
__________________________________________________
_________________________
3-13
Step16
Start with the vertical brush on the bottom
row!
Remove the protective tape.
Step17
Position and align the brush to the top edge of
the dark box.
Carefully fix the brush to the darkbox. Take
care that the bristles are aligned with black
metal border of the screen!
Step18
Proceed accordingly to attach the brush on the
next module.
Take care for a neat and proper joint!
Step19
When all the vertical brushes are attached,
proceed with the horizontal brushes on the
bottom row.
Please note:
Since the brush is in-between the support
profiles, it has to be cut by 2x30 = 60mm.
Use a saw to adjust the length!
You have to shorten half of the horizontal
brushes!