Installation manual

3. Installation of Screen Module
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
3-4
3.2 Installation of the standard screen module
• Place the screen module on the guide pins (Figure 3-3) on the front of the dark box. Be careful to ensure
that the edges of the screens are not damaged.
Figure 3-5
Screen module
• Screw on the screen module with an hexagon key size 5 mm (torque 1
(torque 1(torque 1
(torque 1-
--
-2 NM).
2 NM).2 NM).
2 NM).
Figure 3-6
positions of screw connectors
• The screen module is held by four screw connectors fitted in the dark box. Figure 3-3 shows the positions of
these screws at the dark box.