Installation manual

2. Set up of OverView mD
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
2-6
Figure 2-8
Polygonal installation of dark boxes rear view
• Use the polygonal template to align the two dark boxes. The two profiles (A + B) must fit exactly together
with the template (polygonal arrangement).
Figure 2-9
polygonal alignment of dark boxes
• Insert profile connectors into the corner profiles of each dark box of the first row and tighten securing screws
(size 6 hexagon key).
• Place the dark boxes of the second row onto the profile connectors of the dark boxes at the first row.