Installation manual

2. Set up of OverView mD

OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006

________________________________

________________________________________________________________

__________________________________________________________

____________________________________________________

__________________________

2-5

Supportin

frame

Profile connector

Securing screw

Figure 2-6

profile connectors

• Unpack the dark boxes.

• Remove the two covers from the backside of each dark box.

• Place the dark boxes of the first row onto the profile connectors of the supporting frame.

Supporting frame

Dark box

Figure 2-7

Installing dark box onto the supporting frame

• Screw the dark boxes together through the holes in vertical profiles (only linear arrangement)

• Screw the dark boxes together using the polygonal connector kit (polygonal arrangement).