Installation manual

2. Set up of OverView mD
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
2-4
Figure 2-4
Polygonal installation of support rear view
2.2 Set up of Dark Boxes
When assembling the dark boxes, take special care that adjacent dark boxes are fitted exactly lined up.
The following tools are required when assembling the dark boxes:
Size 5 and 6 hexagon keys.
Size 10 socket spanner.
Size 12 and 13 fork wrenches.
Figure 2-5
profile connector
• Insert profile connectors into the corner profiles of each supporting frame and tighten securing screws (size 6
hexagon key).