Installation manual

10. Manual User Interface
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
_________________________________________________________
__________________________________________________
_________________________
10-4
10.1.4 Indication of Power LED
Color Blink Mode Meaning
Red
Static
Projector is in Standby-Mode (=Off)
Green Static Projector is in Operation-Mode (=On)
Yellow Blinking/Fast Projector is starting up
Yellow Blinking/Slowly Projector is switching off
Green Blinking/Slowly
Projector is in Operation-Mode (=On);
a Non Critical Error occurred;
Check status for more information;
then press Standby Switch/On for acknowledge
Red Blinking/Fast
Projector off (Standby) because of a Critical Error;
Service required;
after service press Standby Switch/On for acknowledge
Green Blinking/Fast
Projector is in Operation-Mode (=On);
a Critical Error occurred;
Check status for more information.
10.1.5 Indication of Lamp Door LED
Color Blink Mode Meaning
Red Static
lamp is switched off,
lamp door can be opened for servicing
Green Static
lamp is switched on,
DON’T open the lamp door!
(in case the door is opened, the lamp is switched off automatically)
Yellow Static
lamp is switched on for Hot Standby mode or Auto Switch mode (17
minutes changeover time),
DON’T open the lamp door!
(in case the door is opened, an error occurs)
Only open the lamp door in case the lamp door LED shines red.