Installation manual

8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
_________________________________________________________
__________________________________________________
_________________________
8-40
8.5.13.4 Runtime Warning
Figure 8-59
Service|Lamps|Runtime Warning
In this menu the limit for a Lamp Runtime Warning can be set in the range 0 hours to 15000 hours. Default
value is 6000 hours (nominal operation time of the 120W UHP lamps).
• Move the cursor key to Runtime Warning
• Press Enter to select.
A dialog pops up where the current lamp runtime is indicated.
Figure 8-60
Lamp Runtime Warning set to 6000 hours
After the specified runtime time a warning message will appear on the screen.
Figure 8-61
Lamp Runtime Warning