Installation manual

8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
_________________________________________________________
__________________________________________________
_________________________
8-31
8.5.6.5 Lamp Driver
Selecting this entry, displays a list with the lamp drivers of the different versions of the illumination unit:
Figure 8-43
Service |Maintenance|Lamp driver
Selecting this command opens a dialog to select the correct lamp driver. Default setting (factory setting) is
PowerPack 120W. This selection has to be adjusted according the actual lamp driver employed in the system.
Figure 8-44
select the correct lamp driver