Installation manual

1. Assembly of support frame
OverView D 50" – DOC-3303-5 – installation manual – Revision 11 – November 2006
________________________________
________________________________________________________________
__________________________________________________________
____________________________________________________
__________________________
1-5
• Insert the two lower panels.
Figure 1-6
The panels must be tightened by securing screws and joined by rivets (see Figure 1-6).
• Install both top profiles PU II 3. One of these profiles is equipped with 3 more counter nuts than the other.
This profile must be installed at the front of the support frame between the profiles
PU I I and PU I 2.
Figure 1-7