Specifications

Driver and Software Installation

• Windows XP Professional x64 Edition,

• Windows Server 2003,

• Windows Server 2003 x64 Edition, and

• Windows Vista 32 & 64 Bit Edition.

You will need to install the B

ARCO CORONIS 5MP MAMMO Display system

drivers and software in the following cases:

• After you have installed the display controller(s) for your

ARCO CORONIS 5MP MAMMO Display System in your system for

the first time.

• After you have reinstalled or upgraded your operating system.

• After you have moved the display controller(s) to a different

PCI/PCIe slot.

1. Start your system. When the Found New Hardware Wizard

comes up, click Cancel. When the System Settings Change

window asks you to restart your computer, click No or Restart

Later.

2. Run the Barco Product Installation Wizard.

The Barco Product Installation Wizard should start automatically

if you insert the B

ARCO CORONIS 5MP MAMMO Display System

Installation CD-ROM into your CD/DVD drive after the operating

system has started. If your CD/DVD drive’s auto-run is not

enabled or the Barco Product Installation Wizard does not start

automatically, you can run the Barco Product Installation Wizard

manually by following these steps:

a) Click the Start button in the task bar.

b) Click Run.

c) Click Browse and browse to the root directory of the

ARCO CORONIS 5MP MAMMO Display System Installation CD-

ROM and click on the file, Setup.exe, and click Open.

d) Click OK.