Specifications

Driver and Software Installation
57
Command line (Silent) Install of Drivers and Software
(Not supported with Windows Vista)
Specifying the silent install option causes most of the GUI associated
with the installer to disappear. A background progress window will
still be visible, but no user input will be required.
The silent install behavior is dictated by the SETUP.INI file. Each
application is allowed to have separate command-line parameters for
normal and silent installs.
To install the drivers and software silently, please follow the steps
below:
1. Insert the B
ARCO CORONIS 5MP MAMMO Display System Installation
CD-ROM into your CD/DVD drive. When the Barco Product
Installation Wizard starts click “Cancel”.
2. Click the Start button in the task bar.
3. Click Run.
4. Click Browse and
a) Browse to the root directory of the B
ARCO CORONIS 5MP
M
AMMO Display System Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
or
a) Browse to the root directory of the location where you
saved the contents of your B
ARCO CORONIS 5MP MAMMO
Display System Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of the
line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
D:\Setup.exe -silent