Specifications

Display Controller Installation
32
7. Align the display controller(s) for your BARCO CORONIS 5MP MAMMO
Display System with the slot(s) and press it(them) in firmly until
the card(s) is(are) fully seated.
Note: The next step applies only to the MXRT 5100, MXRT
7100, and MXRT 7200.
8. Connect the power cable(s) to the 6-pin power connection(s) on
the graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
Figure 6: Power connection for the MXRT 5100, 7100, & 7300 controllers
Figure 7: Power connection for the MXRT 7200 controller
6-pin graphics controller
power cable
6-pin graphic controller
power cables - connect
2 cables as shown