Nio 2MP LED Display User Guide MDNC-2221 ENABLING BRIGHT OUTCOMES
Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com Registered office: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.
Table of contents 1 Welcome!.......................................................................................................................................................................................................... 5 1.1 1.2 What's in the box ................................................................................................................................................................................6 At a glance ..............................................................
5 Maintenance...............................................................................................................................................................................................29 5.1 5.2 Scheduled maintenance .............................................................................................................................................................30 Cleaning instructions.............................................................................................
Welcome! 1 K5903058 /11 Nio 2MP LED Display 5
Welcome! 1.1 What's in the box Overview • • • • • • • • • MDNC-2221 display User guide System sheet Documentation disc DisplayPort cable DVI cable USB cable Mains cable(s) External power supply If you ordered a Barco display controller, it's also in the box together with its accessories. A dedicated user guide is available on the documentation disc. Keep your original packaging. It is designed for this display and is the ideal protection during transport and storage. 1.
Welcome! - Steady amber: Display switched off via the standby key, or display in hibernate mode (requires DPMS mode and Hibernate to be enabled in the OSD menu, see “DPMS mode”, page 23 and “Hibernate”, page 23) 7. Ambient light sensor 8. Front sensor Back 6 7 8 9 10 1 2 3 4 5 Image 1–2 1. +24 VDC power input 2. USB-A 2.0 downstream connector 3. USB-B 2.0 upstream connector 4. DVI video input 5. DisplayPort video input 6. Connector compartment cover 7. Kensington security lock 8.
Welcome! 8 K5903058 /11 Nio 2MP LED Display
Installation 2 K5903058 /11 Nio 2MP LED Display 9
Installation 2.1 Display controller installation About Before you install your display and connect it with the workstation, make sure to have a suitable1 display controller installed in the workstation. The Nio 2MP LED Display display operates at its full specifications when driven by a Barco MXRT display controller and MXRT driver (which also includes the Barco Intuitive Workflow Tools). If you ordered a MXRT display controller, it is included in the box of your display.
Installation Image 2–2 WARNING: The display must be in its highest position before it can be properly pivoted. Store the foot lock clip in the storage hole in case the display needs to be transported later. Image 2–3 If, after installing the display of the system, you change the panel orientation while an image is on the screen, the result depends on the graphic board and the resolution of the image. In some cases the image will be rotated automatically, in other cases it will not be rotated (e.g.
Installation Image 2–4 2. Connect a video source from your workstation to the corresponding video inputs on the display. Caution: Connect only one of the two video inputs. Connecting both inputs simultaneously will result in driver errors. Image 2–5 3. Connect the workstation's USB host to the USB upstream connector on the display if you want to make use of QAWeb or any of the display USB downstream connectors (e.g. to connect a keyboard, mouse, touch pad or other peripheral). Image 2–6 4.
Installation Image 2–8 6. Close the connector compartment cover. You will hear a “click” sound when the cover is in position. Image 2–9 7. Connect the external DC power supply to a grounded power outlet by using one of the power cables included with the display. 2.4 MXRT driver and Intuitive Workflow Tools installation About When you are using a Barco MXRT display controller, you can start up your Nio 2MP LED Display display system and install the MXRT driver and Intuitive Workflow Tools .
Installation 4. Install the MXRT driver and Barco’s Intuitive Workflow Tools as described in the Barco “Display Controller and Intuitive Workflow Tools” user guide on the included documentation CD, or at www.barco.com/support. 5. When the drivers are completely installed, your display will automatically detect the connected video input signal(s) and apply the correct video mode and refresh rate. 2.
Installation 3. Remove the plastic cover with a flathead screw driver. Image 2–11 4. Slide the plastic cover over the neck of the foot. Image 2–12 5. Remove the four screws fixing the foot while supporting the foot. Image 2–13 6. Attach the arm stand firmly to the panel using 4 screws M4 x 8 mm.
Installation 16 K5903058 /11 Nio 2MP LED Display
Daily operation 3 K5903058 /11 Nio 2MP LED Display 17
Daily operation 3.1 Recommendations for daily operation Optimize the lifetime of your display Enabling the Display Power Management System (DPMS) of your display will optimize its diagnostic lifetime by automatically switching off the backlight when the display is not used for a specified period of time. By default, DPMS is enabled on your display, but it also needs to be activated on your workstation. To do this, go to the “Power Options” of your workstation.
Daily operation The key auto-dim function can be disabled in the OSD menus. Please refer to “Key indicator lights”, page 18 for detailed instructions on how to do this. 3.3 Standby switching About standby switching The connected power supply also provides a switch that can be used to turn the power completely off. To use the display, please make sure to switch on this power supply. This can be done by pushing the on/off switch on the power supply into the “│” position.
Daily operation Enter Cancel Standby (IEC 60417–5009) 20 K5903058 /11 Nio 2MP LED Display
Advanced operation 4 K5903058 /11 Nio 2MP LED Display 21
Advanced operation 4.1 OSD menu language About the OSD menu language By default, the OSD menu comes up in English. However, there’s a wide range of other languages available for the OSD menu of your Nio 2MP LED Display. To change the language of the OSD menu: 1. 2. 3. 4. Bring up the OSD main menu. Navigate to the Configuration > User Interface > Menu menu. Enter the Language submenu. Select one of the available languages and confirm. 4.
Advanced operation 4. Select Automatic/Always On/Always Off as desired and confirm. 4.5 Power lock function About the power lock function By enabling the power lock function, the Nio 2MP LED Display is forced to remain switched on. This means that it can’t be switched to stand-by mode manually until the power lock function is disabled again. To enable/disable the power lock function: 1. 2. 3. 4. Bring up the OSD main menu. Navigate to the Configuration > User Interface > Controls menu.
Advanced operation 4. Select Enabled/Disabled as desired and confirm. To specify the hibernate time-out: 1. 2. 3. 4. Bring up the OSD main menu. Navigate to the Configuration > Power Management menu. Enter the Hibernate Timeout submenu. Set the time-out value as desired and confirm. 4.8 Luminance target About the luminance target The luminance target of your Nio 2MP LED Display is adjustable over a predefined range.
Advanced operation display functions have been defined. These functions emphasize on these parts containing crucial diagnostic information by correcting the native panel behavior. The available display functions for your Nio 2MP LED Display are: • • • • • Native: If you select Native, the native panel behavior will not be corrected. Dynamic Gamma 1.8 or 2.2: These are gamma functions that are shifted to take into account the non-zero luminance of an LCD panel when driven with a “black” signal.
Advanced operation 4.12 Display orientation About Display orientation Your display automatically detects its physical orientation (portrait or landscape) and, by default, automatically adjusts the image orientation to this. This means that when your display is physically rotated, the image will rotate along. The OSD menu however, allows to overrule this behavior and force the image orientation to portrait or landscape regardless of the physical orientation of the display.
Advanced operation 4.15 Display info About display info Your display serial number, color type, native resolution, firmware versions, etc. are available in a dedicated submenu of the OSD menu. To retrieve info about your display: 1. Bring up the OSD main menu. 2. Navigate to the About this Display menu to make the information visible on the screen. 4.16 Display status About display status The Status submenu of the OSD menu provides info on the current status of your display (runtimes, temperatures, etc.
Advanced operation 28 K5903058 /11 Nio 2MP LED Display
Maintenance 5 K5903058 /11 Nio 2MP LED Display 29
Maintenance 5.1 Scheduled maintenance About The Nio 2MP LED Display does not require any scheduled maintenance or calibration activities. We recommend to use QAWeb with the Barco default tests and frequencies to calibrate and maintain the display, or to return the display to a Barco approved maintenance organization. In any case of doubts, please contact Barco Healthcare. 5.
Maintenance CAUTION: When a small object or dust is tucked between the front bezel and the LCD surface (for displays without front glass), carefully remove with a soft object such as a plastic card or finger nail. Do not use sharp objects such as paperclips or tweezers to avoid damage to the LCD. CAUTION: Do not apply or spray liquid directly to the display as excess liquid may cause damage to internal electronics. Instead, apply the liquid to a cleaning cloth.
Maintenance 32 K5903058 /11 Nio 2MP LED Display
Important information 6 K5903058 /11 Nio 2MP LED Display 33
Important information 6.1 Safety information General recommendations Read the safety and operating instructions before operating the device. Retain safety and operating instructions for future reference. Adhere to all warnings on the device and in the operating instructions manual. Follow all instructions for operation and use. Electrical Shock or Fire Hazard To prevent electric shock or fire hazard, do not remove cover. No serviceable parts inside. Refer servicing to qualified personnel.
Important information • • • Mains lead protection (U.S.: Power cord): Power cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles. Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standard of your particular country. Korea: Use KC certified products; Plug: 250 V~, 16 A; Power cord: 60227 IEC 53, 3G0.
Important information Operating principle The single device output analog signals through ADC element (Analog Digital Convert) conversion to become a digital signal and the video signal is via Video Decoder conversion. It has become the same digital signal, these signals via Scaler IC as zoom in or out action and digital image processing, then through the cable line transmission LVDS signals to one of the LCD module.
Important information According to the “Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products ” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”.
Important information 中国RoHS自我声明符合性标志 / China RoHS – SDoC mark 本产品符合《电器电子产品有害物质限制使用管理办法》和《电器电子产品有害物质限制使用达标管理目录》 的要求。 This product meets the requirements of the “Management Rule on the Use Restriction of Hazardous Substances in Electrical and Electronic Products” and the “Management Catalogue for the Use Restriction of Hazardous Substances in Electrical and Electronic Products”. SDoC 绿色自我声明符合性标志可参见电子档文件 The green SDoC mark is visible in the digital version of this document.
Important information 6.4 Regulatory compliance information Indications for use The display is intended to be used for displaying and viewing digital images (excluding digital mammography) for review and analysis by trained medical practitioners. Intended usage environment • • • The display is not in contact with patients. The display is not in the same environment as the patient. The display is intended to be used in a dedicated diagnostic reading room.
Important information • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC responsible: Barco Inc., 3059 Premiere Parkway Suite 400, 30097 Duluth GA, United States, Tel: +1 678 475 8000 Canadian notice CAN ICES-001(B) / NMB-001(B) Brazilian local representative BARCO LTDA, Av. Ibirapuera, 2332 – Torre II – 8° andar, Sao Paulo, Brazil 6.
Important information Interference can be determined by turning the equipment off and on. If this equipment does cause harmful interference to, or suffer from harmful interference of, surrounding equipment, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna or equipment. Increase the separation between the equipment and receiver.
Important information Immunity to RF wireless communications equipment Test frequency (MHz) Band (MHz) Service Modulation 385 380 – 390 TETRA 400 450 430 – 470 710 Maximum power (W) Distance (m) Immunity test level (V/ m) Pulse modulation 18 Hz 1.8 0.3 27 GMRS 460, FRS 460 FM ± 5 kHz deviation 1 kHz sine 2 0.3 28 704 – 787 LTE Band 13, 17 Pulse modulation 217 Hz 0.2 0.3 9 800 – 960 GSM 800/ 900, TETRA 800, iDEN 820, CDMA 850, LTE Band 5 Pulse modulation 18 Hz 2 0.
Important information Indicates the device is approved according to the UL regulations for Canada and US Indicates the device is approved according to the UL regulations for Canada and US E352529 Indicates the device is approved according to the UL Demko regulations. Indicates the device is approved according to the CCC regulations. Indicates the device is approved according to the VCCI regulations. Indicates the device is approved according to the KC regulations.
Important information Indicates the DisplayPort connectors on the device. Indicates the legal manufacturer. Indicates the manufacturing date. Indicates the entity importing the medical device into the locale. yy Indicates the temperature limitations3 for the device to safely operate within specs. xx MD SN REF UDI Indicates that the device is a Medical Device. Indicates the device Serial Number. Indicates the device part number or catalogue number. Indicates the Unique Device Identifier.
Important information Indicates this device must not be thrown in the trash but must be recycled, according to the European WEEE (Waste Electrical and Electronic Equipment) directive. Indicates Direct Current (DC). Indicates Alternating Current (AC). Stand-by Equipotentiality Protective earth (ground) or Symbols on the box On the box of the device, you may find the following symbols (nonrestrictive list): Indicates a device that can be broken or damaged if not handled carefully when being stored.
Important information yy % 85 Indicates the range4 of humidity to which the device can be safely exposed when being stored. yyy kPa 106 Indicates the range4of atmospheric pressure to which the device can be safely exposed when being stored. 5x % xx kPa 50 6.7 Legal disclaimer Disclaimer notice Although every attempt has been made to achieve technical accuracy in this document, we assume no responsibility for errors that may be found.
Important information Active screen size (H x V) 432 x 324 mm (17.0 x 12.8") Aspect ratio (H:V) 4:3 Resolution 2MP (1600 x 1200 pixels) Pixel pitch 0.
Important information 48 Net weight with stand With protective cover: 12.6 kg Without protective cover: 11.3 kg Net weight w/o stand With protective cover: 7.6 kg Without protective cover: 6.3 kg Net weight packaged With protective cover: 16.8 kg (without optional accessories) Without protective cover: 15.
Important information Operating pressure 70 kPa minimum Storage pressure 50 to 106 kPa 6.9 Open source license information Open source license information This product contains software components released under an Open Source license. You acknowledge living up to the conditions of each separate Open Source Software license. A list of the Open Source Software components used is available in the applicable EULA, through the “My Barco” section of the Barco website or through other (online) means.
Important information 50 K5903058 /11 Nio 2MP LED Display
Troubleshooting 7 K5903058 /11 Nio 2MP LED Display 51
Troubleshooting 7.1 Troubleshooting General If you experience trouble with the LCD display, refer to the following troubleshooting. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on the screen • • • Push the standby button. Check if all I/O and power connectors are correctly connected as described in the “installation” section. Make sure the pins of the connectors are not crooked or broken.
Barco NV President Kennedypark 35 8500 Kortrijk Belgium K5903058 /11 | 2021-12-20 www.barco.
