User manual

Chapter 2. Configuration Utility
Barco TouchScreen Controller 11
Multiple controllers
When multiple controllers are connected it is not always clear to
which monitor they correspond. To check to which monitor a
controller corresponds, proceed as follows:
1. In the General tab page, click the controller of which you
wish to check the corresponding monitor.
2. In the Tools tab, click on [Draw Test] and check on which
monitor the test pattern appears. That is the monitor that is
currently mapped to the selected controller.
<Add> / <Remove>
The [Add] and [Remove] buttons do not function with USB
controllers.
Setting
There are 5 functional groups in the Setting property page: Beep,
Linearization Style, Double Click Time, Double Click Area and
Mouse Mode.