User manual

Chapter 2. Configuration Utility and Right Button Emulator
Barco TouchScreen Controller 25
Axis to <Larger>, the cursor will be moved a number of pixels to
the right.
If users set the Offset Y Axis to <Smaller>, the cursor will be
moved a number of pixels to the top. If users set the Offset Y Axis
to <Larger>, the cursor will be moved a number of pixels to the
bottom.
<Edge Compensation Switch>
Users can Enable / Disable Edge compensation at the left bottom
corner of Touchkit Utility.
The +10% and -10% buttons will adjust the edge settings.
If you press the +10% button, the top, bottom, left and right
edges will extend by 10% and the Offset X and Y Axis settings
increase with 10 pixels.
If you press the -10% button, the top, bottom, left and right
edges will decrease by 10% and the Offset X and Y Axis settings
decrease with 10 pixels.
Click Default to restore the default settings.