User manual

Chapter 2. Configuration Utility and Right Button Emulator
24 Barco TouchScreen Controller
<Top>
If users set the Edge to <Smaller>, TouchKit will reduce the
horizontal position of the top edge. If users set the Edge to
<Larger>, TouchKit will extend the horizontal position of the top
edge.
<Bottom>
If users set the Edge to <Smaller>, TouchKit will reduce the
horizontal position of the bottom edge. If users set the Edge to
<Larger>, TouchKit will extend the horizontal position of the
bottom edge.
<Left>
If users set the Edge to <Smaller>, TouchKit will reduce the
vertical position of the left edge. If users set the Edge to
<Larger>, TouchKit will extend the vertical position of the left
edge.
<Right>
If users set the Edge to <Smaller>, TouchKit will reduce the
vertical position of the right edge. If users set the Edge to
<Larger>, TouchKit will extend the vertical position of the right
edge.
<Offset X Axis> / <Offset Y Axis>
In some cases, the cursor will be behind the finger when users
touch the panel. If users cannot see the cursor when they touch
the panel, users can the set X Axis or Y Axis offset to move the
cursor.
However this is generally not recommended.
If users set the Offset X Axis to <Smaller>, the cursor will be
moved a number of pixels to the left. If users set the Offset X