User manual

Chapter 2. Configuration Utility and Right Button Emulator
20 Barco TouchScreen Controller
Shutdown utility dialog
There are five buttons in the shutdown utility.
[Standby] to enter standby mode, saving power consumption.
[Shutdown] to turn off the PC.
[Reboot] to restart the PC.
[Cancel] to minimize the Shutdown utility dialog.
[Exit] to close the Shutdown utility.
<Mouse Mode>
There are three kinds of mouse modes you can choose:
[Normal Mode]
Provides all the mouse functions, including the dragging function.
[Click on Touch]
Click action is executed as soon as users touch the panel.
[Click on Release]
Click action will not be executed until finger leaves the panel.
<Option>
Touchkit provides an option for advanced Mouse Emulation
setting. When the Option button is pressed, a setting property
sheet will be popped up. Support Constant Touch and Support
Auto Right Button check boxes are shown in the property sheet
to enable / disable Constant touch and Auto right button support.