User manual

Chapter 2. Configuration Utility and Right Button Emulator
16 Barco TouchScreen Controller
If you press [Yes] the calibration parameters in display memory
are cleared and replaced by the default calibration parameters.
Press [25ptCal] in the Advanced window to start the 25 points
calibration. The following pattern appears.
Touch the blinking symbol on the screen until the computer
beeps or the symbol stops blinking.
After calibration, new calibration parameters are stored in the
display memory, overwriting the previous ones.
Important: Do not touch the touch screen until the main screen
appears again. Otherwise the new calibration parameters will not
be written to the display memory and the calibration will have to
be redone.
Setting
There are three functional groups in the Setting property page:
Sound options, Mouse Mode and Double Click Adjustment.