User manual

Chapter 2. Configuration Utility and Right Button Emulator
14 Barco TouchScreen Controller
Touch the blinking symbol on the screen until the computer
beeps or the symbol stops blinking.
After calibration, new calibration parameters are stored in the
display memory, overwriting the previous ones.
Important: Do not touch the touch screen until the main screen
appears again. Otherwise the new calibration parameters will not
be written to the display memory and the calibration will have to
be redone.
<Draw Test>
With Draw Test you can test the calibration of the touch screen.
Click on the [Draw Test] button. A rastered pattern appears
where you can test the touch screen.