User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-65
In the figure above the blue video object is the most on the left. The red logo object and the black clock object
are aligned to its upper side. The Y coordinates of the teal application object do not overlap with the other ob-
jects; therefore it is not aligned.
Align vertically
The command Align vertically aligns all objects of the selection whose X coordinates overlap. The upper sides of
these objects will be aligned to the left side of the most top of these objects.
Figure 5-48
Vertical alignment of a selection
Here the X coordinates of three objects overlap. They get aligned vertically. The blue video object remains un-
aligned.
Align both
The command align both aligns all objects of the selection in horizontal and in vertical direction in the way ex-
plained above.
Figure 5-49
Horizontal and vertical alignment of a selection
The Y coordinates of the three objects on top overlap, so they are aligned horizontally. Also the X coordinates of
the two objects in the middle overlap; they are aligned vertically.