User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-60
Save layout…
With the Save layout dialog a layout can be saved. In the Save layout dialog box type the template name into
the Filename box and press OK.
This command is also accessible via the
button.
Save layout as…
A layout can also be saved under another name. With the command Save layout as… the dialog box can be
opened. Type the layout name in the Filename box and press OK.
Delete layout…
With the Delete layout dialog box a layout can be deleted.
To delete one of the stored layouts, open the Delete layout dialog box. In the Delete layout dialog box click on
the name of the layout you want to delete or type the name into the filename box and press OK.
5.4.2 Setup layout
The command Setup layout… opens the Layout properties dialog box. The settings of this dialog determine the
background of the selected layout.
A background color can be chosen. If Bitmap is selected a file can be used as background. Section
8.1 Data
structure and data access contains an instruction how to make bitmaps accessible to the H
YDRA. A bitmap can either
be centered, tiled or scaled.
If Enable external overlay is chosen, input from the overlay input card can be displayed by using it as back-
ground, please refer to section
8.3 Redundant operation.
Figure 5-44
Layout properties – dialog box