User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-51
M – Video Tab Brightness 0-255
Contrast 0-255
Sat 0-255
streaming video via
Streaming video board
HUE 0-360
R – RGB Tab HStart 0-2047
RGB input card HActiveWidth 0-2047
VStart 0-2047
VActiveWidth 0-2047
HTotal 0-4095
Phase 0-31
Clamp position 0-255
Clamp width 0-255
Red gain 0-255
Red offset 0-127
Green gain 0-255
Green offset 0-127
Blue gain 0-255
Blue offset 0-127
Table 5-11
Settings of video and RGB sources
On the Crop settings dialog the visible area of the video can be set. There are three possibilities to edit the
cropped view, with the mouse, with the sliders or with the numerical values in the text field.
To edit the measures of the cropped view with the mouse, move the mouse into the upper part of the dialog,
which contains the visual presentation of the cropped view. When moving the mouse over the border of the
cropped view, the mouse becomes a resize tool and you can drag the borders by keeping the left mouse button
pressed. If the mouse is inside the cropped view it becomes a move tool and you can move the section within
the normal view.
The sliders and text fields can also be used. The position of the X and Y Offset sliders define the distance of the
visible video image towards the left and top position of the available video image in percent. The Width and
Height sliders consider the remaining space between current X Offset position and right border, respectively Y
Offset position and lower border as their available range. The numerical values in the boxes at the right side
consider always the whole width or height of the normal view as 100%.
Figure 5-36
Crop settings dialog