User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-50
Setting Applies to Meaning
Video cards:
Automatic Chrominance
Gain Control
Quad analog video card
Automatic gain control for chrominance values of
the video signal switched on or off
Crop settings all cards
Opens the Crop settings dialog, to adjust the
visible part of the video; see below.
Default all cards Resets the sliders to the default values
Type all cards except Streaming Video Card indicates the type of the source
Type selection
all cards except Streaming Video Card,
HD-SDI input card
From a list a dedicated type can be set.
HD-SDI input card performs always autodetection.
SVHS Dual analog input card Choice between VHS and SVHS
Stream Streaming video card Selection of the active stream
RGB input card :
Sync State specifies the format of the RGB signal
Default default resolution for the signal
The selection of the video stream for a Streaming Video Card will be overruled when assigning an-
other stream to this source with the Edit object dialog of a video object, please refer to section
5.6.4
Edit object… .
The table below lists all available display settings for digital and analog video and RGB sources:
Source type Video source parameters Value range
S – Video Tab Black 0-255
Brightness 0-255
SDI video via
Dual SDI input card
Contrast 0-1023
SatSinHUE 0-2047
SatCosHUE 0-2047
S – Video Tab Brightness 0-255
Contrast 0-255
SDI video via
Quad SDI input card
Sat 0-255
HUE 0-360
H – Video Tab Brightness 0-255
Contrast 0-255
HD-SDI video via
HD-SDI video card
Sat 0-255
HUE 0-360
A – Video Tab Brightness 0-255
Contrast 0-255
analog video via
Dual analog video card
SatU 0-255
SatV 0-255
HUE 0-255
A – Video Tab Brightness 0-255
Contrast 0-127
analog video via
Quad analog video card
Sat 0-127
HUE 0-255