User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-46
Encoder
manufacturer – type
compression
algorithm
IP
protocol
Skip at
start
Skip at
end
Stream
type
TCP Video
PID
NiceVision – Recorder Pro mpeg4 RTP 0 0 auto OFF 0
Only CIF resolution, only I and P frames are used.
No successive Video Object Plane (VOP) start markers without data (used in
recorded streams);
Stream must be multicasted and always available on the network (no
stream setup signaling required).
mpeg2 RTP 0 0 auto OFF 0 Optelecom-NKF –
c15 / c20 / CS20
The Ethernet interfaces must be set to Forced 100 Mbps Full Duplex, when con-
necting to an NKF Switch.
Optibase – MGW3100 mpeg2 auto OFF
Path 1 – Cx 1800 mpeg2 UDP 0 0 auto OFF 0
Pelco – PelcoNet NET350 h263 RTP 0 0 auto OFF 0
I-frame distance may not be 0.
Pelco – PelcoNet NET4001A mpeg2 RTP 4 0 auto OFF 0
No on-board RCP+ support.
Pelco – PelcoNet NET4001A h263 RTP 0 0 auto OFF 0
No on-board RCP+ support; limited frame rate.
Siemens OTN – MVIDIP mpeg2 OFF
Siemens OTN – MVIDIP mpeg4 RTP 0 0 auto OFF 0
Tandberg – E5710 mpeg2 OFF
Tandberg – Mediaplex-20 mpeg2 UDP 0 0 auto OFF 0
Tandberg – TT6120 mpeg2 UDP 0 0 auto OFF 0, 1, ...
Generates multiple-program transport streams (MPTS). The Video PID is
used to select the program.
Tandberg – TT7116 mpeg2 UDP 0 0 auto OFF 590
Teleste – EASI BLUEbox /
EASI IPET1 / EASI IPET3 /
EASI MoRIS
mpeg2 UDP 0 0 auto OFF 0
Teleste – EASI MoRIS /
EASI MPC-E1 / EASI MPC-
E2 / EASI MPC-E4 /
EASI MPX-E8
mpeg4 RTP 0 0 auto OFF 0
Telindus – Cellstack Centauri mpeg2 RTP 0 0 auto OFF 0
mpeg2 UDP 0 0 auto OFF 0 VBrick – VB4000 / VB6000
ISMA features not supported.
mpeg4 UDP 12 0 auto OFF 0 VBrick – VBXcast 9140-4200 /
VBXcast 9140-4300
ISMA features not supported.
Verint – S1500e / S1600e-T mpeg4 RTP 0 0 auto ON 0
Startstring example: SmartSight
Only with encoder firmware 3.20 build 444. Usage of S1700e recommend.
Verint – S1700e mpeg4 RTP 0 0 auto ON 0
startstring example: SmartSight